Kn95 Mask Machine Kn95 Mask Production Equipment High Efficiency Quality Assurance

- Jun 18, 2020-

The kn95 mask machine is different according to the original materials used. The masks produced can reach different specifications such as FFP1, FFP2, N95, etc. The earbands are elastic non-woven fabrics, which makes the wearer's ears comfortable and pressure-free. Mask filter cloth The layer filtering function is good, perfectly conforms to the Asian face shape, and can be applied to high pollution occupations such as construction and mining.


  N95, KN95 mask production steps:


   1. Incoming material embossing and cutting: unwinding material, three layers of non-woven fabrics, one layer of velvet cloth, knurled cutting once formed, knurled cutting and formed samples;


   2. Ultrasonic welding ear wire: manual single-point welding ear wire, one mask with four welding points, it takes about 6 seconds to complete the ear wire welding work of a mask;


   3. Nose bridge support: Install the nose bridge support on the sheet mask through the viscous device. Nose bridge support: length: 9mm width: 5mm;


   4. Folding and folding forming: pressing on the right side after opening.


  KN95 mask machine features:


   1. The machine is dense, small in size and does not occupy space;


   2. PLC program control, high stability and low failure rate;


   3. The whole machine adopts aluminum alloy structure, which is beautiful and solid without rust;


   4. Photoelectric detection to reduce the error rate;


   5. The welding strength of the ear strap is adjustable;


   6. Using ultrasonic system, stable performance and easy operation;


   7. Servo drive, high stability and low failure rate.


KN95 mask body machine, also known as mask tablet machine, is a machine used for the automatic production of multi-layer material flat mask finished products. It can use 1~4 layers of N95PP spunbond nonwoven activated carbon and filter materials. The entire machine is made from raw materials. It is expected that the insertion of the nose line, edge banding, and cutting of the finished product are all in a semi-automatic operation.