What systems do mask automation equipment need to know?

- May 19, 2020-

Important system of mask automation equipment


1. Ultrasonic system:


(Consisting of ultrasonic electric box, ultrasonic transducer, welding head, connecting wire)


Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer (sensation element), welding head (mold) need to be cleaned monotonously without water, and the connection line is strong. Always check the degree of wear of the ultrasonic welding head (mold). Observe carefully whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.


2. Transmission system:


The transmission system includes motors, gears, speed reducers, sprockets, chains, conveyor belts and other components. The maintenance requirements of the south side Lijin mask machine check whether the surface of the motor is affected by dust and other things, whether the gears and sprockets are oiled or not Attachments. Is the chain tightness suitable for foreign matter? Is the connecting screw of each transmission loose? Is the lubricating oil of the reducer enough? It is usually necessary to replace the lubricant once in 1000 hours to 1500 hours.


3. Electrical system:


Check whether the circuit connector of the mask machine is loose, and whether the main power cable and branch signal cable are worn? Ageing? Loose? Is the electric box clean and monotonous, is the exhaust fan working properly, etc.


4. pneumatic system:


(Consisting of air source filter system, trachea, cylinder)


Is there water in the air filter check? (Water discharge from air compressor: water should be given to the air compressor every day in areas with high humidity). Check for air leaks in the trachea? Does the cylinder leak? Cylinder magnetic anti-sensor orientation and work is normal.

n95 mask manufacturing machine

Mask automation equipment must not be exposed to corrosive liquids and objects, for example, sweat can easily cause equipment parts to rust. If the equipment is not used for a long time, the transmission system and rusty parts of the mask machine should be coated with anti-rust oil.


The mask manufacturer maintains the mask production equipment according to the above requirements, not only can reduce the number of repairs of the mask machine, but also improve the working life of the mask machine, and thus provide the company's production efficiency.