The utility model relates to a manufacturing method of a hand mold seat for a double molded rubber glove production line

- Jan 02, 2020-

Background technology:

At present, the hand-mold seat for PVC, nitrile and latex two-hand mold production lines is the closed bearing chamber introduced from Malaysia, the positioning block height is small, and the two sets of bearings in the bearing room do not need clearance installation, which has the following disadvantages:

(1) the bearing chamber, in the production of gloves, if the bearing chamber is open, it is inevitable that the gloves smudgy, because now the gloves for medical and food industry, gloves smudgy major defects, so now the gloves production lines were closed bearing chamber, it brings a very serious problem, bearing sealed in indoor, bearing lubrication became a big problem, because there is no lubrication, the bearing can only be equipped with an oil when installation, and operation of the holder environment is bad, is in commonly 200 degrees above the oven running for a long time, resulting in high temperature of bearing and jammed, service life more than in the eight months or so,It's a big waste for glove manufacturers;

(2) two sets of bearing close together without clearance, because the holder is a cantilever structure after installation on fingerprint, once the bearing clearance increases due to use and lubrication, increasing hand print in holder momentum, knock against, it is easy to cause adjacent fingerprint, in turn, will hand print on the gloves struggling, cause waste, the waste hard to weed out from production line, mix to the quality goods, to the customer can cause serious quality accidents.

Industrial Glove Dipping Machine

Technical realization elements:

In order to overcome the shortcomings of the existing technical scheme, the utility model provides a hand mold seat for a double molded rubber glove production line, which increases the overall height of the bearing chamber, maintains a longer lubrication time, and can effectively solve the problems raised by the background technology.

The technical scheme adopted by the utility model to solve its technical problem is as follows:

A double molding rubber gloves production line with holder, including the top set has a collar of l-type curved arm and plates, as described in connection with l-shaped bent arm bearing chamber, described in the bearing chamber through core shaft connection plates, and described the core shaft through in the plate at the top of the locating piece, mentioned at the bottom of the bearing chamber connected with spring cover, and described the spring cover and positioning block between the spindle axis body suit with a spring, whose character is:The inner part of the bearing is installed with a core shaft through two bearings axially, and a spacer sleeve is arranged between the two bearings. The top of the core shaft is provided with a cross-shaped inner perforating channel, and the top of the inner perforating channel extends to the top of the core shaft, and an oil hole is arranged on the top wall of the bearing chamber opposite to the inner perforating channel.

Compared with the prior art, the beneficial effect of the utility model is:

(1) the utility model processes an oil hole on the closed bearing chamber, and then drills holes on the hand mold seat shaft to form an oil passage, which not only ensures that the bearing chamber is basically closed, the gloves are not dirty during production, but also enables the bearing to get timely lubrication.

(2) the utility model increases the height of the bearing chamber by adding a separate sleeve between the two sets of bearings, the height of which should be 15-20 mm. After improvement, the same bearing clearance greatly reduces the collision phenomenon at the hand mold, improves the quality rate of gloves, and reduces the proportion of waste products entering the genuine products.

Technical features:

1. A double molding rubber gloves production line with holder, including the top set has a collar of l-type curved arm and plates, as described in connection with l-shaped bent arm bearing chamber, described in the bearing chamber through core shaft connection plates, and described the core shaft through in the plate at the top of the locating piece, mentioned at the bottom of the bearing chamber connected with spring cover, and described the spring cover and positioning block between the spindle axis body suit with a spring, whose character is:The inner part of the bearing is installed with a core shaft through two bearings axially, and a spacer sleeve is arranged between the two bearings. The top of the core shaft is provided with a cross-shaped inner perforating channel, and the top of the inner perforating channel extends to the top of the core shaft, and an oil hole is arranged on the top wall of the bearing chamber opposite to the inner perforating channel.

2. According to the hand mold seat for the production line of a double-molded rubber glove mentioned in claim 1, its characteristics are as follows: the spring cover suit is on the mandril, and the top of the spring cover is provided with a clip spring for holes, and a clip spring for shafts is provided between the clip spring for holes and the interior wall of the bearing.

3. According to the hand mold seat for a double molded rubber glove production line mentioned in claim 1, its characteristics are as follows: the connection between the mandrel and the plate is provided with a reinforcing plate, and the connection between the mandrel and the plate is fixed and installed together through a pressing plate.

4. According to claim 1, a hand mold seat for a double molded rubber glove production line is characterized in that the height of the spacer is between 15mm-20mm.

5. According to the hand mold seat for the double molded rubber glove production line mentioned in claim 1, its characteristics are as follows: the transverse hole through the inner hole runs through the surface of the core shaft.

Technical summary

The utility model discloses a double molding rubber gloves production line with holder, including the top set has a collar of l-type curved arm and plates, as described in connection with l-shaped bent arm bearing chamber, described in the bearing chamber through core shaft connection plates, and described the core shaft through the positioning for the located in the top plate, as described in the bottom of the bearing chamber connected with spring cover, and described the spring cover and positioning block between the spindle axis body suit with spring, bearing interior ministry described by two bearing axial equipped with core shaft, and set up between the two bearings have described spacer, top of the spindle is set inside a cross through the channel, and described through the hole in the top extends to the top of the spindle,In addition, oil holes are arranged on the top wall of the bearing chamber opposite to the inner through-hole to increase the overall height of the bearing chamber and maintain a longer lubrication time.