The method of producing the turning track for the condom production line

- Dec 04, 2019-

Background technology:

Existing condoms are made of synthetic natural rubber, natural latex and waterborne polyurethane without additives through pollution-free synthesis and processing of condoms, there are products thin (0.02mm), good density and barrier of the product is high, do not contain water-soluble protein and nitroamine.

Condom production line at present, in the process of production mold has been upright, condom is made in the process of semi-finished products can cause in under the action of gravity, such as thin under thick, affect the quality of the products, the existing technology, has adopted horizontal drying production line structure, but the condom production line after various processing program has vertical state into the state of the lateral track structure is complex, track structure is not stable, and to track the production cost is higher.

Technical realization elements:

The purpose of the utility model is to provide the turning track for the condom production line, so as to solve the problem proposed in the above background technology that the track structure of the condom production line is complicated, the track structure is not stable enough, and the production cost of the turning track is high.

To achieve the above purposes, the utility model provides the following technical scheme:Condom production lines used to track, including base, described in the base set headed with stents, described in the upper bracket set on rails, described with the top of the track Settings have slippery course, set on the upper surface of slide rail there are a number of mold, described in the mold by mold installation with fixed connection between slide rail, referred to the lower end of the slide rail fixed connection with slide rail base, described in the slide rail base embedded set in the interior of the orbit, and both sides of the slide rail base symmetric set several idler pulley, described in the slides under the surface of the base set rack, described in the orbital runs several hole under the surface,Described in the top bracket located at the bottom of the slide rail base location set drive gear, gear described by gear bracket is installed on the upper bracket, and mentioned the top base is located in the stand on one side of the drive motor, described in the drive motor through a transmission mechanism and between the drive gear transmission connection, described in the drive motor and electrical connection between the power converter.

Compared with the existing technology, the utility model beneficial effect is: adopt unique to the form of the track structure of slide rail can be stable in the interior of the orbit, prevent slippery course and the mould is loose, adopt the structure of spiral orbit, ensure mold transverse Settings in the drying process, to ensure that the product drying effect, idler pulley set reduces the resistance between orbit and slippery course, effectively improve the efficiency of flow, the overall scientific and reasonable structure, strong practicability.

Technical features:

1. The steering track for the condom production line, including the base, is characterized by:Described described base set headed with stents, stent set headed with orbit, orbit described set flush with the top of the slide, slide rail set on the upper surface has described several moulds, described in the mold by mold installation with fixed connection between slide rail, as described in the lower end of the slide rail fixed connection with slide rail base, described in the embedded set inside the orbit of slide rail base, and both sides of the slide rail base symmetric set several idler pulley, as described under the base of the slippery course to set over the surface of rack, described in orbit under the surface of the opened several hole, described in the upper bracket located at the bottom of the slide rail base location have transmission gear set,The driving gear is installed on the upper end of the support through the gear bracket, and the upper end of the base is installed on one side of the support, and a driving motor is installed. The driving motor is connected via the driving mechanism and the driving gear, and the driving motor is electrically connected with the external power supply.

2. According to claim 1 of the condom production lines used to track, whose character is: described the top set has a drying mechanism, and orbit spiraling through drying, drying mechanism described the entry side track up set, and the drying mechanism inside the track vertical set in one side, as described in the outlet track down drying system.

3. According to the turning track for the condom production line mentioned in claim 1, its characteristics are as follows: the mould is arranged on the surface of the slide track with equal spacing in the shape of a word.

4. According to the turning track for the condom production line mentioned in claim 1, its characteristics are as follows: the transmission gear meshes with the rack through the through hole.

5. According to the steering track for the condom production line mentioned in claim 1, its characteristics are as follows: the regulating wheel is respectively connected with the upper and lower inner arm of the track by rolling.

Technical summary

Used to track the utility model discloses a condom production line, including base, described in the base set headed with stents, described in the upper bracket set orbit, orbit described set flush with the top of the slide, slide rail set on the upper surface has described several moulds, described in the mold by mold installation with fixed connection between slide rail, as described in the lower end of the slide rail fixed connection with slide rail base, described in the embedded set inside the orbit of slide rail base, described in the slides under the surface of the base set rack, described in orbit under the surface of the opened several hole, described in the upper bracket located at the bottom of the slide rail base location set has a drive gear.The utility model adopts a unique form of steering track structure, which can stabilize the sliding track in the inside of the track and prevent the loosening of the slide track and the mold. The track adopts a spiral structure form to ensure the transverse setting of the mold in the drying process, and ensure the drying effect of the product. The overall structure is scientific and reasonable, with strong practicability.

避孕套9