In the production of rubber gloves are a step in the process of the rubber gloves off from the hand in the shape of mold, at present most enterprises are manually by workers removed and handling, the intensity of labor is big, efficiency is low, although there have been some ejection device, but the demoulding device clamp are mainly airbag peace plate clamp two kinds, gasbag of the chuck need continuous deflated, low efficiency, high energy consumption, also to seal requirement, plate type of clamp when clamping gloves, gloves and the lack of contact area (this is because the hand in the shape of a die is uneven and is rigid), therefore easily caused by a lack of friction, invalidate demoulding,Affect the production efficiency, and if in order to increase the friction force and increase the plate type clamp clamping force, stress between plate type collet and gloves are easy to cause damage to gloves, rubber gloves and general production of automatic ejection device can't work continuity, we provide an automatic ejection device field, in order to solve the above technical background in the questions.
Technical implementation elements:
The purpose of the utility model is to provide an automatic stripping device for rubber dipped gloves to solve the problems mentioned in the background technology.
To achieve the above purposes, the utility model provides the following technical scheme:An automatic ejection device field, including the fixed plate and the support bar, described the fixed plate of the back is equipped with motor, described in the fixed plate is equipped with rotary table of the side and back of motor with fixed by screw plate is fixed connection, as described in the shaft of the motor through the fixed plate and the rotary table central back fixed connection, described the wheel side before a long pole, is the subject of a long pole side before opening a long slot, long groove with activities described rod, described in the activity at the end of the rod and the rotary side before the fixed connection, as described in the under side of the long pole with arc oscillating plate, arc described the under side of the swing plate has a sports bar, referred to the underside of sports bar with T limit board,Described T upper limit board connected to the underside of sports bar activities, sports bar and upper arc described the under side of the swing plate connection, described in the movement to the left side of the rod is equipped with the pin shaft, and the outer edge of the pin shaft is equipped with the torsional spring, torsion spring described with arc plate, the upper and lower sides of upper and lower sides of torsional spring is respectively connected with one end of the two groups of arc splint fixed, referred to the ends of the pin shaft is equipped with the connecting rod, one end of the connecting rod with two groups of stated pin connection at both ends of the activity, and in the two groups before and after the other end of the connecting rod and movement of rod side fixed connection, described the long rod through the pin shaft and fixed plate wall active connection.
Compared with the prior art, the utility model has the following beneficial effects:
1. The rotation of the rotary plate driven by an electric motor makes the long rod swing, so the arc-shaped swing plate drives the motion rod to do reciprocating motion, so the arc-shaped splint clamps the mold out;
2. The setting of guide plate and guide groove makes the two groups of arc splints squeeze and hold each other when moving to the left, which is convenient for clamping the mold. When moving to the right, the two groups of arc splints separate from each other and the clamped mold breaks away from the arc splints;
3. The t-type limit plate and pulley are set to reduce friction and make the rod easy to reciprocate.
Working principle:The utility model through the motor driving wheel rotation makes long pole swings, it makes the arc swing plate drive movement lever do reciprocating motion, thus make the arc plate clamp die out, the guide plate and the guide groove set makes two group of curved plywood in the movement to the left is squeezing and holding each other, easy to clamp the mould, the movement to the right when two group of curved plywood separated, caught the mold from arc splint, which arc the under side of the swing plate and sports bar with spline, upper arc oscillating plate connected to the sports bar mesh, facilitate force transfer, the underside of sports bar open railroad channel slot, T limit board fixed with upper pulley,The pulley is located in the track groove to reduce friction and facilitate smooth reciprocating movement. The length of the long groove is larger than the diameter of the rotary disc, and the movable rod is located in the eccentric position of the rotary disc to make the long rod swing.