In the labor process, the hand is the most vulnerable part of the human body, in all industrial accidents, hand injury accounts for about a quarter, so the protection of the hand is a very important part of occupational safety.Labor protection gloves are a kind of labor protection supplies, which are widely used in construction, industry and mining, metal, machinery manufacturing, glass, hardware, electromechanical, heavy industry operation and other industries for labor protection due to its characteristics of acid and alkali resistance, corrosion resistance, high temperature resistance, cold resistance and so on.However, the existing labor protection gloves are simply covered with a layer of rubber, which is not flexible and breathable enough for fingers, poor slip resistance and easy to fall off when grasping objects. The back of the hand is not protected, and the parts often used, such as the palm part, the finger fork part and the fingertip part, are easily worn out.
Technical implementation elements:
The purpose of the utility model is to overcome the shortcomings of the traditional technology mentioned above, and provide a breathable labor protection glove with flexible finger, breathable air, not easy to fall off when taking things, and thickened palm center, finger fork and fingertip.
The purpose of the utility model is achieved through the following technical measures:
A breathable labor protection glove comprises a glove composed of a palm part, a wrist part set at one end of the palm part, a thumb part set at the other end of the palm part and four fingers. The glove is characterized by: the palm part has the palm center part, the back part of the palm part and the finger fork part, which is located between the thumb part and four fingers;The thumb has the outer part of the thumb, the inner part of the thumb and the tip part of the thumb. The outer part of the thumb is on the side connected with the back of the palm. The inner part of the thumb is on the side connected with the center of the palm.The four fingers are provided with the outer part of the fingers, the inner part of the fingers and the fingertip part. The outer part of the fingers is located on the side where the four fingers are connected with the back of the palm. The inner part of the fingers is located on the side where the four fingers are connected with the center of the palm.Described the palms and thumbs and four fingers covered with rubber, rubber described with breathable area on the outside of the fingers and thumb external described respectively in the palm and splitter and the tip of the thumb and fingers of thickening layer, respectively described within the finger is convex, described in the thickening layer and raised around the gum line, described palm back with film.
Rubber cover on the outside of the fingers and thumb external ventilation area, can play a role of good air, in the process of using finger won't feel hot, pick the frequency of the gloves, reduced the work palms and splitter and tip of the thumb and fingers of the thickening layer can than ordinary rubber is more wear-resisting, increase the service life of the gloves, thickening layer and bump and glue line make rubber surface uneven, can play a good non-slip effect, the better to avoid grasping objects fall off phenomenon, to ensure the safety of the wearer, palm back film in ensuring the accuracy of permeability at the same time to ensure the safety of the wearer's hand.
The advantages of the utility model are as follows:
The utility model provides a breathable labor insurance gloves, on the outside of the rubber cover on the outside of the fingers and thumb set well ventilated area, breathable area on the outside of the finger joints have widened, have played an important role of good air, improve the flexibility of fingers, palm and splitter and tip of the thumb and fingers of the sub set the thickening layer, make gloves when use more wear-resisting, increase the service life of the gloves, thickening layer surface to grind arenaceous processing, increase the use of friction, glue line for depression status, more convenient to grasp objects gloves of the bending, improve the whole flexibility in the process of using,The thickened layer, raised and sunken rubber line makes the surface of the rubber layer appear uneven, which can play a very good anti-skid effect and effectively avoid falling off when holding the object. The elliptical film on the back of the palm can ensure the air permeability and also play a good role in protecting the covering area.