Abstract: the invention provides a processing equipment for medical gloves, including a mold cleaning groove and a controller. A slideway is installed on the groove wall on one side of the mold cleaning groove. A movable brush is arranged on the slideway.A sprinkler head is arranged on the tank wall at the upper end of the chute, and the sprinkler head is connected with the water inlet pipe, and a second solenoid valve is arranged on the connecting pipe, and the second solenoid valve is connected with the controller.The bottom of the mold washing groove is provided with an ultrasonic vibration plate which is connected with an ultrasonic generator.A PH value sensor is arranged on the lower side of the other side wall of the mold cleaning groove, and the PH value sensor is connected with the controller.The brush and ultrasonic wave are simultaneously applied to the ultrasonic cleaning tank, the acid cleaning tank or the alkali cleaning tank, so that the cleaning effect is better and the cleaning efficiency is greatly improved
Principal right requirements: 1. A method of application of medical gloves processing equipment, whose character is: including washing tank, controller, was washing module slot on one side of the tank wall mounting a chute (15), chute (15) is set on a brush (7), described the brush (7) connected to the electric motor, motor and controller connected;Described the chute (15) the top of the tank wall set a nozzle (6), the nozzle (6) and the feed line (11), and on the first connection pipe solenoid valve (9), the electromagnetic valve (9) connected to the controller, the tank wall of the entrance to the washing module slot position to install a position sensor (5), position sensor (5) connected to the controller,An ultrasonic vibration plate (3) is arranged at the bottom of the mold washing groove, and the ultrasonic vibration plate (3) is connected with an ultrasonic generator;Described the washing module slot of the underside of the other side set the PH sensor (4), PH sensor (4) connected to the controller, on the same side of the PH sensors (4) side set on a sour lye imports, acid alkali liquor import through pipes and containers of acid alkali have connected, and set up the first solenoid valve in the line (8), the first electromagnetic valve (8) connected to the controller;The ultrasonic generator will send out high-frequency vibration signal, which will be converted into mechanical vibration through the ultrasonic transducer in the ultrasonic vibration plate (3).The glove mold (2) is hung and fixed in the mold conveyor belt (1) above the mold washing groove, and is transmitted along the conveyor belt (1) at a set speed;When the first glove mould slide to wash at the entrance of mold cavity, the tank wall at the entrance of the position sensor (5) the induction signal transmitted to the controller, the controller to control the motor running, and the connection of the motor brush (7) upward movement along the chute, the upper parked in the slide groove (15), and gloves on the conveyor belt (1) (2) through the brush area of die, brush (7) and gloves mould (2) full access and brush off the glove mould corner in the adhesion of dirt;When the position sensor (5) the last glove mould (2) after induction, induction signal transmitted to the controller, the controller is set for a period of time, make the gloves mold (2) in washing cavity clean finish, then send control commands to the first solenoid valve (9), make the nozzle (6) of water to rinse the brush (7), after washing, reverse control motor running, the brush (7) connected to the motor movement down the chute, until the lower end of the sliding groove (15), and hair brush head into the liquid washing mold slot to clean the glue on the brush (7) the dirt;When the gloves after leaving the washing cavity mold cleaning is complete, the PH sensor (4) the monitoring signal transmitted to the controller, the controller to determine processing, sending control command, opened the first electromagnetic valve (8), and acid alkali liquor inlet connection containing acid alkali liquid in the container by importing flow into acid alkali wash in the mold cavity, adjust PH value, make its restore Settings, complete round of cleaning.