Process characteristics of latex gloves

- Mar 23, 2019-

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol.After emulsifying and modulating, the sol is pumped to the tundish.The gasoline-soluble rubber solution is fed from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-gas cooler.Oil and water mixture to the oil and water separator, oil and water stratification.The upper gasoline is recycled, and the lower water is sent to the cooling tower by the water pump.The latex in the distillation tower kettle is sent to the emulsion mixing tank under its own pressure to be stirred and mixed, and then to the centrifuge to separate the raw latex of gloves, and then to be used after color mixing and filtration.

家用、工业用手套生产线 (4)

The glove model was cleaned with acid and alkali and then washed with water. The cleaned model was immersed in hot water and heated until it was soaked with coagulant and dried before being soaked with glue.After rubber dipping, send to oven for preliminary drying, add fiber inner cover, then send hot water to oven for vulcanization, drying and forming.After demolding, the gloves are checked for air inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.

JUBAO is a professional design, manufacture all kinds of gloves equipment production enterprise, its excellent product quality and first-class service to win the customer high praise and recognition. Brings together various excellent equipment research and development personnel and chemical formula of talent, and with a number of well-known domestic and foreign manufacturers, companies, universities and research institutions established long-term strategic partnership, committed to the mechanical equipment frontier technology research and development of new products.