Manufacturing method of new glove dipping slurry tank

- Sep 22, 2020-

【Background technique】

During the processing of dipped gloves, the dipping slurry tank is an indispensable processing device. During production, the rubber material is poured into the dipping slurry tank, and the gloves on the hand mold are dipped into the dipping slurry tank through the operation of the hand mold frame for the dipping operation.

The existing slurry tank has the following disadvantages:

1. When the slurry is working on the production line for a long time, the rubber in contact with the inner wall of the slurry tank will form a slurry, which is not conducive to production, affecting production efficiency, and the rubber waste is serious. When the rubber is serious, it needs to stop production for cleaning. More than 3 hours, the cleaning work not only wastes manpower, but also wastes a lot of clean water, polluting the environment;

2. During dipping or discharging, air bubbles are easily generated inside the rubber and the working surface, and should not be eliminated. Air bubbles not only affect the quality of the product, but also cause defective products on the surface of the finished glove, and affect the circulation effect, resulting in the glue inside the glue pool The physical properties of the materials are inconsistent, and when the air bubbles are serious, it is necessary to stop production and change the glue, resulting in production stoppage and low production efficiency;

3. The circulation effect of the glue pool is not good, there are dead corners, there are rubber blocks at the circulation gear, and can not be cleaned during production, and the height of the rubber working surface is inconsistent, which affects the dipping position of the gloves.

disposable latex medical glove machine

[Utility model content]

The technical problem to be solved by the utility model is to provide a new type of glove dipping slurry tank which can make the slurry form circulation, avoid the formation of slurry skin and effectively break the air bubbles in the slurry.

In order to solve the above technical problems, the provided new glove dipping slurry tank includes a tank body, and its structural feature is: between the two inner walls of the tank body is equipped with a shielding baffle arranged along the longitudinal direction, and the two longitudinal sides of the shielding baffle are connected to the tank. There is a fluid gap between the inner walls. The tank body is equipped with a slurry circulation device that is located under the shielding baffle and can form a circulating flow of slurry in the tank. The tank is also equipped with longitudinal edges that can be connected to the shielding baffle. And the inner wall of the tank cooperates with a bubble breaking device to break the bubbles.

The slurry circulation device includes a slurry shaft arranged longitudinally and rotatably connected to the side wall of the tank. The slurry shaft is driven by the circulating power device. A plurality of slurry shafts extending in the axial direction are distributed on the slurry shaft. Material circulation paddle board.

The foam breaking device includes a foam breaking shaft arranged longitudinally and rotatably connected to the side wall of the tank. The position of the foam breaking shaft corresponds to the position of the longitudinal edge of the shielding plate and is driven by the foam breaking power machine. The foam breaking shaft is equipped with a crushing disc. A plurality of crushing teeth which cooperate with the longitudinal edge of the shielding plate and the inner wall of the groove to break the bubbles are arranged on the outer circumference of the

The longitudinal side of the shielding plate is provided with an inwardly recessed notch, the surface of the foam breaking shaft is arranged adjacent to the edge of the longitudinal side, and the crushing disc extends into the notch.

The crushing teeth include extension edges arranged on the outer circumference of the crushing disc and perpendicular to the crushing disc and extending axially along the bubble-breaking axis, and the extension directions of two adjacent extension edges are oppositely arranged.

The shielding baffle includes a height limiting plate extending vertically and located on the upper side of the slurry circulation device. The height limiting plate is connected to a drainage plate located above the slurry circulation device and having an arc-shaped cross section. The longitudinal sides of the drainage and the inner wall of the tank cooperate to break air bubbles.

After adopting the above structure, the slurry is transferred from above the shielding baffle to below the shielding baffle through the slurry circulation device and then returned to the top of the shielding baffle, that is to say, the slurry is formed into a circulating flow state to avoid skinning and caking of the rubber , And then the slurry goes up through the bubble breaking device to eliminate the bubbles in the slurry, and the defoamed rubber material enters the slurry, which effectively guarantees the dipping quality of the glove and improves the production quality of the product.

In summary, the utility model has the advantages of making the slurry form a circulation, avoiding the formation of pulp skins, and effectively breaking air bubbles in the slurry.


【Sovereignty Item】

1. A new type of glove dipping slurry tank, including a tank body, characterized in that: between the two inner walls of the tank body is provided with a shielding baffle arranged along the longitudinal direction, and between the two longitudinal sides of the shielding baffle and the inner wall of the tank There is a fluid gap, the tank body is equipped with a slurry circulation device that is located under the shielding plate and can form a circulating flow of slurry in the tank, and the tank body is also equipped with the longitudinal edge of the shielding plate and the inner wall of the tank. Carry out the bubble breaking device to break the bubble.

2. The new glove dipping slurry tank according to claim 1, characterized in that: the slurry circulation device includes a slurry shaft arranged longitudinally and rotatably connected to the side wall of the tank, and the slurry shaft is powered by a circulating power device Driven, a plurality of slurry circulating paddles extending along its axial direction are distributed on the slurry shaft.

3. The new glove dipping slurry tank according to claim 1, characterized in that: the foam breaking device comprises a foam breaking shaft arranged longitudinally and rotatably connected to the side wall of the tank, the position of the foam breaking shaft and the shielding plate The longitudinal edges correspond to the positions and are driven by the foam breaking power machine. The foam breaking shaft is equipped with a crushing disk. The outer circumference of the crushing disk is provided with multiple crushing teeth that cooperate with the longitudinal edges of the shielding plate and the inner wall of the tank to break bubbles. 4. The new glove dipping slurry tank according to claim 3, characterized in that: the longitudinal side of the shielding plate is provided with an inwardly recessed notch, and the surface of the bubble breaking shaft is arranged adjacent to the edge of the longitudinal side , The crushing disc extends in with the shortcomings.

5. The new glove dipping slurry tank according to claim 3, characterized in that: the crushing tooth includes an extension edge arranged on the outer circumference of the crushing disc and extending perpendicular to the crushing disc along the axial direction of the bubble breaking axis, two adjacent The extension directions of the extension sides are set oppositely.

6. The new glove dipping slurry tank according to any one of claims 1-5, characterized in that: the shielding baffle includes a height limit plate extending vertically and located on the side above the slurry circulation device, and the height limit The position plate is connected with a drainage plate which is located above the slurry circulation device and has an arc-shaped cross section, and the bubble breaking device cooperates with the longitudinal side of the drainage to break bubbles.

【Patent Abstract】

The utility model discloses a novel glove dipping slurry tank, which comprises a tank body. A shielding baffle arranged along the longitudinal direction is installed between the two inner walls of the tank body, and between the two longitudinal sides of the shielding baffle and the inner wall of the tank. There is a fluid gap, the tank body is equipped with a slurry circulation device that is located under the shielding plate and can form a circulating flow of slurry in the tank, and the tank body is also equipped with the longitudinal edge of the shielding plate and the inner wall of the tank. Carry out the bubble breaking device to break the bubble. The utility model has the advantages of allowing the slurry to form a circulation, avoiding the formation of pulp skins and effectively breaking the air bubbles in the slurry.