Manufacturing method of automatic detection machine for disposable gloves

- Dec 04, 2020-

Background technique:


In some industries where gloves are replaced frequently, it is usually recommended to use disposable gloves, which can not only avoid cross-infection, but also greatly save replacement costs, such as the medical industry, laboratories, food processing industries and other industries that have relatively high hygiene requirements. According to the material, it is generally divided into plastic disposable gloves, latex disposable gloves, and nitrile disposable gloves. At present, the commonly used method for the leak detection of disposable gloves is to flush the glove with air, curl the glove towards the fingers, and keep the opening of the disposable glove closed. The pressure of the air increases due to compression, which prompts the disposable gloves to expand, and then the air leakage is detected by manual observation.


Existing inspection methods are manually inspected, which is not efficient and takes a long time, which reduces the overall work efficiency. At the same time, the gloves are stretched during the inspection, resulting in reduced service life. For this reason, we have designed a one-time Sexual gloves automatic detection machine to solve the above problems.

Latex glove dipping machine

Technical realization elements:


The purpose of the utility model is to solve the shortcomings existing in the prior art, and proposes an automatic detection machine for disposable gloves.


In order to achieve the above purpose, the present utility model adopts the following technical solutions:


An automatic detection machine for disposable gloves, including a frame, the frame is composed of a workbench and a support frame vertically installed on the workbench, the workbench is provided with a number of detection cavities, the upper side of the detection cavity is connected by a hinge There are two sets of support plates, and the positions of the two sets of support plates are symmetrical. The upper sides of the inner walls on both sides of the detection chamber are equipped with symmetrical telescopic cavities. The two sets of telescopic cavities are slidably connected with sealing splints. An elastic pad is arranged on the side, and the end of the electric push rod is vertically connected to the center of the two sets of sealing splints away from the elastic pad. The electric push rod is fixedly installed at the bottom of the telescopic cavity, and the support plate is clamped with a limit sleeve. The lower side of the limiting sleeve is provided with a glove sleeve, and a lifting device is provided directly above the limiting sleeve. The lifting device includes a detection head, a pressure sensor, a base plate, an electric cylinder, and a guide sleeve. The support frame is provided with an electric cylinder. The piston rod of the electric cylinder passes through the support frame and is vertically connected with a base plate. The outer side of the piston rod is provided with a guide sleeve. The guide sleeve is fixedly installed on the support frame of the frame. One side is connected with a cylindrical detection head, the inside of the detection head is provided with air supply channels along the vertical direction, and the air supply channels are distributed in a circular shape, and the side of the detection head close to the limit sleeve is provided with a mounting groove, and the mounting groove A pressure sensor is installed.


Compared with the prior art, the beneficial effect of the present invention is: in the present invention, the cooperation of the sealing splint and the glove sleeve ensures the tightness of the glove cuff and does not wear the glove. The piston can be controlled by the guide sleeve. The movement direction of the rod, through the cooperation of the detection head and the pressure sensor, the device delivers air quickly. Through the pressure detection of the gas inside the disposable glove, it can accurately and effectively detect the tightness of the disposable glove. The warning light can make the operator accurately judge The sealing performance of the gloves is good or bad, the device has a simple structure, can be automatically detected, the detection results are accurate, and the operation is convenient, which improves the work efficiency of disposable gloves detection.

Technical characteristics:


1. An automatic detection machine for disposable gloves, comprising a frame, characterized in that the frame is composed of a workbench and a support frame vertically installed on the workbench, and the workbench is provided with several detection cavities. The upper side is connected by hinges with two sets of support plates, and the positions of the two sets of support plates are symmetrical. The upper sides of the inner walls on both sides of the detection chamber are equipped with symmetrical telescopic chambers. The two telescopic chambers are slidably connected with sealing splints. The opposite side of the sealing splint is provided with an elastic pad, and the end of the electric push rod is vertically connected to the center of the two sets of sealing splints away from the elastic pad. The electric push rod is fixedly installed at the bottom of the telescopic cavity, and the support plate A limit sleeve is clamped on the upper side, a glove sleeve is arranged on the lower side of the limit sleeve, and a lifting device is arranged directly above the limit sleeve. The lifting device includes a detection head, a pressure sensor, a substrate, and an electric cylinder And a guide sleeve, the support frame is provided with an electric cylinder, the piston rod of the electric cylinder passes through the support frame and is vertically connected to the base plate, the outer side of the piston rod is provided with a guide sleeve, and the guide sleeve is fixedly installed on the support frame of the frame, so A cylindrical detection head is connected to the side of the substrate away from the piston rod, the inside of the detection head is provided with air supply channels along the vertical direction, and the air supply channels are distributed in a circular shape, and the detection head is provided with a side close to the limit sleeve The installation slot, a pressure sensor is installed in the installation slot.


2. An automatic detection machine for disposable gloves according to claim 1, wherein the two sets of sealing splints are semicircular plates, and the diameter of the two sets of sealing splints is the same as the diameter of the glove sleeve.


3. An automatic detection machine for disposable gloves according to claim 1, wherein a sealing ring is provided on the side of the substrate close to the detection head.


4. An automatic disposable glove testing machine according to claim 1, wherein the support frame of the frame is provided with a controller, the output end of the pressure sensor is connected to the controller, and the model of the pressure sensor is PTG500, the model of the controller is TYC-Z.


5. An automatic disposable glove detection machine according to claim 1 or 4, wherein the support frame of the rack is provided with a warning light, the warning light is red, and the output terminal of the controller is connected to the warning light. Connected.


6. The automatic detection machine for disposable gloves according to claim 1, characterized in that the cuff part of the disposable glove is sleeved on the glove sleeve, and the diameter of the glove sleeve is slightly larger than the diameter of the cuff. .


7. The disposable glove automatic inspection machine according to claim 1, wherein the model of the electric push rod is TG-300-D, and the model of the electric cylinder is SC50X200.


8. The automatic detection machine for disposable gloves according to claim 1 or 3, wherein the sealing ring and the elastic pad are made of rubber materials.

Technical summary

The utility model discloses an automatic detection machine for disposable gloves, which includes a frame, a workbench is provided with a plurality of detection cavities, the upper side of the detection cavity is connected with two sets of support plates through a hinge, and the inner walls of both sides of the detection cavity are provided on the side There are telescopic cavities with symmetrical positions. The two sets of telescopic cavities are slidably connected with sealing splints. The end of the electric push rod is vertically connected to the center of the two sets of sealing splints away from the elastic pad, and the electric push rod is fixedly installed in the telescopic chamber A limit sleeve is clamped on the support plate, a glove sleeve is arranged on the lower side of the limit sleeve, and a lifting device is provided directly above the limit sleeve, and the lifting device includes a detection head, The pressure sensor, the base plate, the electric cylinder and the guide sleeve are provided with an installation groove on the side of the detection head close to the limit sleeve, and a pressure sensor is installed in the installation groove. The utility model has the advantages of simple structure, automatic detection, accurate detection results, and convenient operation, which improves the working efficiency of disposable glove detection.