Coating tank coating liquid condensation system of latex glove automatic production line

- Feb 02, 2021-

Summary: 

The utility model discloses a coating liquid condensation system for a coating tank of a latex glove automatic production line, which comprises a coating tank. The outer surface of the coating tank is covered with a thermal insulation cotton layer, and the outer surface of the thermal insulation cotton layer is wrapped with an aluminum plate; Eight stainless steel coils are evenly laid on the bottom of the layer tank and on the surface of the aluminum plate. The two sides of the stainless steel coil are connected by stainless steel pipes as crosspieces. One side and two sides of the crosspiece are opened with a ø400mm hole, which is used as the cooling water inlet. For the water inlet and the water outlet, a stainless steel ball valve is installed on the side of the water inlet, and a stainless steel check valve is installed on the side of the water outlet. The inlet and outlet are connected to the external refrigeration unit for the closed loop of the condensing system. The utility model can effectively suppress the increase in the temperature of the coating liquid caused by the continuous immersion of the mold, and adopts methods such as built-in condenser, cooling water circulation, and heat preservation outside the tank to meet the temperature requirements of the coating liquid, and extend the use period of the coating liquid as much as possible , To achieve the desired purpose.

latex gloves making machine

Sovereignty:

1. A coating tank coating liquid condensation system of an automatic latex glove production line, comprising a coating tank, characterized in that: the outer surface of the coating tank is covered with a thermal insulation cotton layer, and the outer surface of the thermal insulation cotton layer is wrapped with an aluminum plate; Eight stainless steel coils are evenly laid on the bottom of the coating tank and on the surface of the aluminum plate. The two sides of the stainless steel coil are connected with stainless steel pipes as crosspieces. One side and two sides of the crosspiece are opened with a ø400mm hole, which is used as cooling water. For the water inlet and outlet, a stainless steel ball valve is installed on the side of the water inlet, and a stainless steel check valve is installed on the side of the water outlet. The inlet and outlet are connected with the external refrigeration unit for the closed loop of the condensing system; The eight stainless steel coils are divided into four groups with two adjacent ones as a group. The two adjacent groups are connected by crosspieces on both sides, and the group pipes and the group pipes form a one-way flow to ensure that the cooling water always flows from The water inlet enters and flows out from the outlet on the other side; the safety distance between the stainless steel coil and the fingertip of the mold running on the production line is more than 40mm, and the crosspieces on both sides are lower than the coating liquid level, so that the entire The condensing device is completely immersed under the coating liquid, and only the inlet and outlet pipes are connected to the external equipment.

2. The coating tank coating liquid condensation system of the latex glove automatic production line according to claim 1, characterized in that the heat exchange area of the eight stainless steel coils is 2.5 square meters, which is equivalent to the surface heat exchange area of the inner wall of the coating tank .