A method for producing a stable plastic glove injection molding device

- Jun 12, 2019-

Background technology:

Injection molding machine can have a molding processing and the characteristics of fast, now is widely used, its processing products for complex shape, size and accurate or plastic with metal insert of fine and close texture, applied to the defense, electrical, automotive, transportation, building materials, packaging, agriculture, culture and education of health and People's Daily life each domain, injection molding process of all kinds of plastic processing and has good adaptability, high productive capacity, easy to realize automation.

For the working principle of injection molding machine and injection syringe are similar, it is with the help of a screw or plunger of thrust, will have been plasticizing good molten plastic injection into the closure of the mold cavity, after curing finalize the design the technological process of the obtained products, injection molding in the injection molding because of the moisture inside the shop too much, often can cause injection plastic suction, cause of injection products is unqualified, brought great for injection molding, plastic gloves are most of them adopt rubber production technology for processing production, processing, this way the production efficiency is not high, and the process is complex, need a lot of manpower material resources to operate.

Now to provide a steady plastic gloves injection device, can realize fast plastic gloves layer of plastic processing, and effectively prevent the injection molding of plastic cooling, the dryer to dry contacts injection molding processing, reduced the water on the top of the injection molding, to prevent too much water when we do the injection products such as bubble caused by the unqualified phenomenon.

Technical implementation elements:

For the problems in the existing technology, the utility model provides a stable plastic gloves injection device, can achieve rapid plastic gloves layer of plastic processing, and effectively prevent the injection molding of plastic cooling, the dryer to dry contacts injection molding processing, reduced the water on the top of the injection molding, to prevent too much water when we do the injection products such as bubble caused by the unqualified phenomenon.

In order to achieve the above purposes, the technical scheme adopted by the utility model is as follows:

A steady plastic gloves injection device, including base, described the base sliding equipped with cylinder, described in the base at the top of the servo motor, servo motor driver described cylinder along the vertical direction, described in the cylinder with screw, cylinder is equipped with heater, described by heater heating the material within the cylinder for plasticizing, described at the bottom of the cylinder with injector, described at the bottom of the injector with spray head, top of the cylinder has injection machine, described by injecting motor control injector in plastic injection, described in the material on the top of the wall of tube connected with feed tube, described in the feed tube is equipped with vibration motor, described in the feed pipe connection with hopper,Through the hopper to the feed cylinder, through vibration motor to prevent the feed tube plugging material, mentioned below the injector has clamping mechanism, clamping mechanism through the cylinder after closing sliding on the base of ejector jet head on the mould and injection plastic, mold clamping mechanism described below with conveyor, side clamping mechanism with ejector, described by ejector products from grinding tool jacking, so that products get off, drop on the bottom of the conveyor belt, described clamping mechanism with ejector joint with blowing mouth, blowing mouth connected with blower and heater described, through the hot air to reduce the water around the injector,Prevent plastic water absorption after causing product quality problems.

The utility model beneficial effect displays in: through the hopper at the bottom of the heating chassis preheat the supplies, material into the cylinder of the plasticizing efficiency, shorten the melting time, speed up the productivity, through the heating coil to avoid the ejector cooling solidification molten material, increase the stability of the equipment, auxiliary fall off after molding, products through the ejector, by hot air injection can decrease the surrounding water, avoid water affect the quality of injection molding, improves the automation of the equipment, reduce the labor burden.