A method for producing a simple setting device for rubber gloves

- Jul 13, 2019-

Background technology:

Rubber gloves, gloves is made of rubber sheet or film category, according to utility cent acidproof alkali glove, electrical insulating gloves, radiation protection gloves, medical gloves, latex gloves and rubber raw material or manufacturing process in points moulded gloves, rubber gloves setting device it is usually done by artificial setting, workers put the rubber gloves in working platform, to in turn shapes of rubber gloves, qualitative workers use during the process of the mold, can not accurately grasp the pressure, cause the rubber gloves setting effect is not obvious, setting time is too long, and long press the action will cause harm to workers health, easy to cause a series of complications.


Technical implementation elements:

The utility model aims to provide a simple shaping device for rubber gloves to solve the problems mentioned in the background technology.

To achieve the above purposes, the utility model provides the following technical scheme:A simple rubber gloves setting device, including base, described the base fixed plate is set at the top of the side, as described in the front of the fixed plate set a driving gear and driven gear, described in the driving gear connected with one end of the rotating rod, referred to the other end of the rotating shaft through a fixed plate's back, and extend to the fixed plate connected to the crank handle, driven gear described by connecting rod connected with the front of the fixed plate, and the driven gear located below the driving gear, driven gear and the driving gear of the above described by chain transmission links, described the chain on one side of the set has a fixed block,Described on only one side of fixed block by l-shaped connecting rod and the pressure connection, as described in the other side of the base at the top of the set has two vertical plate, and between the two vertical plate fixed installation has long board, long board stated above set a press block, as described in the bottom of the press block connected with one end of the push rod, referred to the other end of the push rod through the long board, and extends long plate connected to the mould.

Compared with the existing technology, the utility model is beneficial effects: the rubber gloves simple setting device, workers began to handle, turn the driving gear, chain rotation, drive the driven gear rotation, set on the fixed block in the chain can move up and down, the briquetting can move up and down, thus produce pressure to press block, the spring compression, mold rubber gloves can work on the stage setting, spring stretched, will press block jacking, ready for the next shapes, this way of setting shaped rubber gloves obvious effect, shorten the setting time, and can avoid long press action on workers health damage, caused a series of complications.

Technical features:

1. A simple setting device for rubber gloves, including a base, characterized by:Described the base fixed plate is set at the top of the side, as described in the front of the fixed plate set a driving gear and driven gear, described in the driving gear connected with one end of the rotating rod, referred to the other end of the rotating shaft through a fixed plate's back, and extend to the fixed plate connected to the crank handle, driven gear described by connecting rod connected with the front of the fixed plate, and the driven gear located below the driving gear, driven gear and the driving gear of the above described by chain transmission links, described the chain on one side of the set has a fixed block, as described in one side of fixed block by l-shaped connecting rod and the pressure connection, referred to the other side of the base at the top of the set has two vertical plate,The bottom of the lower pressing block is connected with one end of the push rod. The other end of the push rod runs through the long plate and extends to the bottom of the long plate to connect with the mold.

2. According to a simple shaping device of rubber gloves mentioned in claim 1, its features lie in that a working table is arranged on the other side of the top of the base, and the working table is located between two vertical plates, and the working table is located under the mold.3. According to a simple shaping device of rubber gloves mentioned in claim 1, its features lie in that the joint of the rotary rod and the fixing plate is provided with bearing.

4. According to a simple shaping device of rubber gloves mentioned in claim 1, its characteristics lie in that the lower pressing block is connected with the long plate by a spring, and the spring sleeve is located outside of the push rod.

5. A simple shaping device of rubber gloves according to claim 1, which is characterized by that one side of the fixing plate is provided with a handle.

Technical summary

The utility model discloses a rubber gloves simple setting device, including base, described the base fixed plate is set at the top of the side, as described in the front of the fixed plate set a driving gear and driven gear, described in the driving gear connected with one end of the rotating rod, referred to the other end of the rotating shaft through a fixed plate's back, and extend to the fixed plate connected to the crank handle, driven gear described by connecting rod connected with the front of the fixed plate, and the driven gear located below the driving gear, driven gear and the driving gear of the above described by chain transmission links, described the chain on one side of the set has a fixed block,One side of the fixed block is connected with the upper pressing block by an l-shaped connecting rod.The simple shaping device of rubber gloves can significantly shape rubber gloves, shorten the shaping time, and avoid a series of complications caused by prolonged pressing action to the health of workers.

photobank (2.1)