Industrial Glove Dipping Machine

Industrial glove dipping machine adopt the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Automatic flocking/electrostatic flocking, can produce monochrome, two-color velvet inside household gloves, can also produce imitation Oxford gloves;The product has bright color, high one-time pass rate and meets the requirements of GB and CE.
Chat Now

Product Details

Industrial glove dipping machine adopt the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Automatic flocking/electrostatic flocking, can produce monochrome, two-color velvet inside household gloves, can also produce imitation Oxford gloves;The product has bright color, high one-time pass rate and meets the requirements of GB and CE.

图片1

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol.After emulsifying and modulating, the sol is pumped to the tundish.The gasoline-soluble rubber solution is fed from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-gas cooler.Oil and water mixture to the oil and water separator, oil and water stratification.The upper gasoline is recycled, and the lower water is sent to the cooling tower by the water pump.The latex in the distillation tower kettle is sent to the emulsion mixing tank under its own pressure to be stirred and mixed, and then to the centrifuge to separate the raw latex of gloves, and then to be used after color mixing and filtration.

The glove model was cleaned with acid and alkali and then washed with water. The cleaned model was immersed in hot water and heated until it was soaked with coagulant and dried before being soaked with glue.After rubber dipping, send to oven for preliminary drying, add fiber inner cover, then send hot water to oven for vulcanization, drying and forming.After demolding, the gloves are checked for air inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.

JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.

工厂

Model

JB-RJA01

JB-RJA02

JB-RJB01

Machine size

45*1.8*4m

80*1.8*4m

60m*6 tiers of chain

Speed

3.0 m/min

6.0 m/min

7.6 m/min

Capacity

1800pcs/hr

3600pcs/hr

4600pcs/hr

Heat consumption

400000kcal/hr

600000kcal/hr

750000kcal/hr

Power

25kw/hr

48kw/hr

55kw/hr

Mould

1800pcs

3200pcs

3600pcs

Chain

180m

320m

360m

Weight

30ton

55ton

70ton


Inquiry