ndustrial construction glove machine adopts the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Industrial construction glove machine adopts continuous production method and direct immersion method, uniform film formation, gorgeous color.
1. The drying box adopts the tunnel drying method, the principle of hot air rising, and the recycling of hot air circulating stirring, so that the machine can get the best effect under the minimum power.
2. Use the principle of effective heating space hot air circulation to reduce cost;Multistage PID intelligent temperature control system, the temperature error is not more than + / - 5 ℃, heated evenly luster.
3. High output, unique design of live joint, simple operation of changing mould, and faster circulation;
4. Automatic vibrating dripping and homogenizing system make the finished gloves more neat and uniform in thickness and thickness.
5. Aiming at the fragile defects of ceramic mould during vibration, the conveying mechanism of this equipment adopts the special guidance track to run smoothly, reliably, non-crawling and non-blocking, meeting the stationarity requirements of the conveying device during operation.
JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom.
Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and
latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,
condom packing machine and other relevant supporting equipment products.
Industrial construction glove machine adopts the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Automatic flocking/electrostatic flocking, can produce monochrome, two-color velvet inside household gloves, can also produce imitation Oxford gloves;The product has bright color, high one-time pass rate and meets the requirements of GB and CE.The upper gasoline is recycled, and the lower water is sent to the cooling tower by the water pump.According to its own pressure, the latex in the distillation tower kettle is sent to the emulsion mixing cylinder to be stirred and mixed, and then to the centrifuge to separate the raw latex for gloves, and then to be used after color mixing and filtration.The rubber is first sliced by a rubber mixer and then sent to a sol cylinder to mix the sol with gasoline.