Hand Dipping Glove Making Machine For Household

Hand Dipping Glove Making Machine For Household

Hand dipping glove making machine for household adopts the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Automatic flocking/electrostatic flocking, can produce monochrome, two-color velvet inside household gloves, can also produce imitation Oxford gloves;The product has bright color, high one-time pass rate and meets the requirements of GB and CE.
Chat Now

Product Details

Hand dipping glove making machine for household adopts the advanced technology and technological formula of Japanese and Korean velvet gloves production line to design, the equipment structure is reasonable, suitable for a variety of formula;Automatic flocking/electrostatic flocking, can produce monochrome, two-color velvet inside household gloves, can also produce imitation Oxford gloves;The product has bright color, high one-time pass rate and meets the requirements of GB and CE.

The production equipment of household hand latex gloves mainly consists of four parts: batching equipment, including mixer, filter barrel, vacuum defoaming machine and rubber liquid conveying pump;The impregnation equipment includes a frame, a conveying chain, a impregnation tank, a recovery tank machine and a drip tank;Plasticizing furnace;Cooling, lip rolling, dusting, demoulding, dusting equipment, including cooling group, lip rolling group, dusting group, demoulding group, dusting group.

图片1

Specially designed elastic piston mould connecting device, easy to replace mould, no mould dropping.

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol.After emulsification and modulation, the sol is pumped to the tundish.The rubber solution dissolved in gasoline is sent from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler.Oil - water mixture to oil - water separator, oil - water stratification.The upper gasoline is recycled, and the lower water is sent to the cooling tower by the water pump.According to the pressure of the distillation tower, the latex is sent to the emulsion mixing cylinder. After mixing and blending, the raw latex is separated from the gloves in the centrifuge. After color mixing and filtration, the latex is prepared for use.The glove model is cleaned with acid and alkali and water first. The cleaned model is immersed in hot water and heated until the coagulant is soaked and the glue is dried.After dipping the adhesive, send to the oven for preliminary drying, add fiber inner sleeve, then send hot water to the oven for vulcanization, drying and forming.After demolding, the latex gloves are checked for inflation, shaped at low temperature, dry at medium temperature, washed, dehydrated and dried, and then packaged and sent to the waste warehouse.

64x64

Technical parameters:

Model

JB-RJA01

JB-RJA02

JB-RJB01

Machine size

45*1.8*4m

80*1.8*4m

60m*6 tiers of chain

Speed

3.0 m/min

6.0 m/min

7.6 m/min

Capacity

1800pcs/hr

3600pcs/hr

4600pcs/hr

Heat consumption

400000kcal/hr

600000kcal/hr

750000kcal/hr

Power

25kw/hr

48kw/hr

55kw/hr

Mould

1800pcs

3200pcs

3600pcs

Chain

180m

320m

360m

Weight

30ton

55ton

70ton

服务2

Inquiry