Nitrile Glove Half Dipping Manufacturing Machine

The model of half-dipped rubber labor protection gloves was cleaned by acid and alkali and then by water. The cleaned model was immersed in hot water and heated until the coagulant was soaked and dried for glue dipping.After dipping the adhesive, send to the oven for preliminary drying, add fiber inner sleeve, then send hot water to the oven for vulcanization, drying and forming.After demolding, the gloves are checked for inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.
Chat Now

Product Details

The model of half-dipped rubber labor protection gloves was cleaned by acid and alkali and then by water. The cleaned model was immersed in hot water and heated until the coagulant was soaked and dried for glue dipping.After dipping the adhesive, send to the oven for preliminary drying, add fiber inner sleeve, then send hot water to the oven for vulcanization, drying and forming.After demolding, the gloves are checked for inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.

The rubber dipping glove production line is also called the rubber dipping glove production line. It is an equipment production line for making latex gloves and rubber dipping gloves.

The frame of Nitrile glove half dipping manufacturing machine is successively arranged with a nesting mold area, a baking embryo area, a primary impregnation area, a secondary impregnation area, a secondary impregnation area, a secondary impregnation area and a demold area. Transition sprocket wheels are set between the two connected areas, and two parallel chains are also set on the frame. The chain is set on the transition sprocket, and the transition sprocket is equipped with a driving mechanism.

The impregnation device is set in the lower part of the constant temperature zone, which is connected with the impregnation zone through the chain, making the electrical equipment and circuit not easy to damage and prolonging the service life. The use of secondary drying and secondary impregnation makes the product more solid and wear-resisting, with a more smooth and beautiful surface.

64x64

64x64

JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.

工厂


Model/length

JB-SUB6A

JB-SUB6B

JB-SUB8

JB-SUB10

JB-SUB12

Dimension(m)

12

18

30

30

30

Capability(pairs/hr)

500

1800

3400

4300

5200

Power(kw)

4.5

5.5

6.5

7

7.5

Mold(pairs)

420

886

1200

1500

1800

Heat consumption(kcal/hr)

160000

200000

300000

400000

500000


Inquiry