JB-SUB Nitrile dipped gloves half dipping machine
The conveying system of Nitrile dipped gloves half dipping machine adopts special guide device and high temperature resistant chain, which is stable, reliable, non-crawling and non-sticking, and meets the requirement of the conveying device's stability during operation.After emulsifying, the sol is pumped to the tundish.Soluble in gasoline rubber solution into from the top of the distillation tower, the heating steam distillation, the light component gas heat into the gas phase, petrol gas cold water in the oil and gas cooler and cooling, oil-water mixture to oil-water separator, oil and water layers, the upper gas recovery, lower again by the water pump to the cooling tower water cooling, cooling after cooling tower of gas gas, latex in accordance with its own pressure distillation tower kettle will be sent latex mixing cylinder, modulated to centrifuge isolated gloves latex raw materials, palette, and then filtered.
1.The machine use continues moving chain which can produce high capacity and low cost glove.
2.Keep dipping level in balance and adjust dipping length automatically.
3.The molds arrange in tight that save lots of oven space
4.Hot air cycle system to make temperature in oven is even
5.The machine has collect system that can reuse the redundant latex
6.Install a whole row molds that can change the mold by row easily which will not affect the production capacity.
After dipping the adhesive, send to the oven for preliminary drying, add fiber inner sleeve, then send hot water to the oven for vulcanization, drying and forming.
JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.