Nitrile Cleanroom Glove Half Coating Machine

The conveying system of Nitrile cleanroom glove half coating machine adopts special guide device and high temperature resistant chain, which is stable, reliable, non-crawling and non-sticking, and meets the requirement of the conveying device's stability during operation.
Chat Now

Product Details

Product Application


After emulsifying, the sol is pumped to the tundish.Soluble in gasoline rubber solution into from the top of the distillation tower, the heating steam distillation, the light component gas heat into the gas phase, petrol gas cold water in the oil and gas cooler and cooling, oil-water mixture to oil-water separator, oil and water layers, the upper gas recovery, lower again by the water pump to the cooling tower water cooling, cooling after cooling tower of gas gas, latex in accordance with its own pressure distillation tower kettle will be sent latex mixing cylinder, modulated to centrifuge isolated gloves latex raw materials, palette, and then filtered.

Technical information:
Model/length
JB-SUB6A
JB-SUB6B
JB-SUB8
JB-SUB10
JB-SUB12
Dimension(m)
12
18
30
30
30
Capability(pairs/hr)
500
1800
3400
4300
5200
Power(kw)
4.5
5.5
6.5
7
7.5
Mold(pairs)
420
886
1200
1500
1800
Heat consumption(kcal/hr)
160000
200000
300000
400000
500000
Nitrile cleanroom glove half coating machine
nitrile glove half dipping machine
half dipping nitrile glove machine


       

Main Features

1.The machine use continues moving chain which can produce high capacity and low cost glove.

2.Keep dipping level in balance and adjust dipping length automatically.

3.The molds arrange in tight that save lots of oven space

4.Hot air cycle system to make temperature in oven is even

5.The machine has collect system that can reuse the redundant latex

6.Install a whole row molds that can change the mold by row easily which will not affect the production capacity.


Inquiry