Full coating nbr glove production dipping machine is also called the rubber dipping glove production line. It is an equipment production line for making latex gloves and rubber dipping gloves.
Automatic ejection device include: frame, used for the transmission of the gloves and gloves in transmission mechanism, clamping device for clamping gloves, used in the holding mechanism about translation of translation agency, translation agencies and conveying mechanism installed on the frame around, holding mechanism connected to the slide rack, transport agencies located below the holding mechanism.It can automatically realize the rubber gloves of demoulding, transmission, without artificial stripping, carrying, high efficiency, greatly reduces the labor intensity of workers, holding mechanism has simple structure, without filling deflated, U collet is flexible, can according to the hand mold when clamping gloves in certain deformation, on the one hand, reduce the pressure of gloves to avoid any damage gloves, increase the contact area between gloves and on the other hand, by the next gloves off from the mold, high working efficiency, and low cost.
The rubber dipping glove production line includes a feeding area, a pre-drying area, an automatic rubber dipping working area, a drying area and a feeding area arranged in sequence;Each area is equipped with a sprocket, which is connected with a sprocket driving device;A closed chain is installed on the driving sprocket, and a glove hand mold is installed on the closed chain;The drying area and the pre-drying area are connected with a high-efficiency gas hot air stove, the drying area is connected with a drying exhaust gas exhaust pipe, the automatic rubber dipping work area is connected with a rubber dipping exhaust pipe, the drying exhaust pipe and the rubber dipping exhaust pipe are connected with the exhaust gas purification treatment device;Also includes electrical numerical control cabinet;The use of CNC automatic technology, greatly improve the degree of automation, improve the production efficiency, reduce the use of artificial, improve the thermal efficiency, reduce energy consumption, and protect the environment, improve the working conditions of workers, so that the production of rubber gloves more soft, improve the competitiveness of the enterprise.
The glove model was cleaned with acid and alkali and water, and the cleaned model was immersed in hot water and heated until the coagulant was soaked and dried for glue dipping.After dipping the adhesive, send to the oven for preliminary drying, add fiber inner sleeve, then send hot water to the oven for vulcanization, drying and forming.After demolding, the gloves are checked for inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.