Suitable materials: PVC emulsion Silicon(SN5200)Latex/Vinyl
Main products: Cotton industrial gloves PVC bead dotting
Production machine to dot and print pvc on cotton glove is also known as gloves planting point machine, gloves point beads machine, gloves dispensing machine, etc., is to point to a layer of PVC particles on the protective layer of labor protection gloves, used to increase the anti-slip and durability of gloves mechanical equipment, is the production of labor protection gloves production equipment.At present, JUBAO glove dotting and printing machine is controlled by PLC automatic control system, electromechanical junction and.Special quartz infrared heating tube is used to plasticize PVC particles to improve the adhesion of PVC.
1.The machine is controlled by computer and combined with electromechanics.
2.Photoelectric sensors are used to automatically control the spot-molding and transmission of the machine.
3.Special quartz infrared heating tube is used to plasticize PVC particles to improve the adhesion of PVC
4.This machine adopts PLC automatic control system and can adjust the production speed randomly
5.Automatic glove stripping is adopted
Model | JB-SDA1 | JB-SDA2 |
Machine size(L*W*H)(m) | 5.7*1.8*1.5 | 8*2.3*1.4 |
Oven temp. range(℃) | Lower than 300 | Lower than 300 |
Hand mold(pairs) | 23 | 35 |
Source air pressure(mpa) | 0.4 | 0.8 |
Air consumption(cbm/min) | 0.6 | 1.1 |
Power(kw) | Start:12 Normal:6 | Start:42 Normal:25 |
Power supply | 3/380V 50Hz | 3/380V 50Hz |
Capacity(doz/hr) | 60-70 | 80 |
Weight(kg) | 800 | 2000 |
