Latex Balloon Dipping Machine With Best Quality

Latex rubber balloons are made from the concentrated SAP of rubber trees.The concentrate contains about 60% of the weight of natural rubber, which is added with a small amount of chemicals and non-toxic colored pigments.Basically natural plant products, latex balloons are completely biodegradable. The manufacturing process of latex rubber balloon can be divided into four main steps. - preparation of latex complex - impregnated - leaching and drying - peel off the finished balloon
Chat Now

Product Details

Latex rubber balloons are made from the concentrated SAP of rubber trees.The concentrate contains about 60% of the weight of natural rubber, which is added with a small amount of chemicals and non-toxic colored pigments.Basically natural plant products, latex balloons are completely biodegradable.

The manufacturing process of latex rubber balloon can be divided into four main steps.

- preparation of latex complex

- impregnated

- leaching and drying

- peel off the finished balloon

Latex rubber balloons are made from the concentrated SAP of rubber trees.The concentrate contains about 60% of the weight of natural rubber, which is added with a small amount of chemicals and non-toxic colored pigments.Basically natural plant products, latex balloons are completely biodegradable.

The manufacturing process of latex rubber balloon can be divided into four main steps.

- preparation of latex complex

- impregnated

- leaching and drying

- peel off the finished balloon

Preparation of latex complex

Concentrated rubber latex is not only the main ingredient in making balloons, but many other products are made from the same materials.

To strengthen the rubber, the rubber polymer is a string of cords and chains that are wound together. When stretched, the rubber polymer has little physical strength and is partially vulcanized by chemicals, including sulfur and accelerants, known as crosslinks, the rubber polymer string connects them into a strong elastic material.This prevulcanization is carried out before the next step.

Dip

Balloon shapers are used to make the required size and shape of an uninflated balloon.Depending on the quality of the balloon to be produced, use shapers of different shapes.Mass-market products are usually made on planar moulding machines, while most decorative airbags are made on circular moulding machines.

Leaching and drying processes.

Once the gels are firmly attached to the molding machine, they go into a leachate, where water extracts unwanted chemical residues and proteins that are naturally present in natural rubber latex.The time and conditions required to wet the balloon determine the quality of the finished balloon in terms of health and safety regulations and standards.

After leaching, the molding machine enters the drying chamber, where rubber is dried and vulcanized at the drying temperature.

The balloon stripping

The dry latex rubber balloon is then removed from the molding machine by stripping.This process can be done manually or mechanically using water or compressed air.

After stripping, check for any defects in the balloon and test the selected sample against established standards.

Store the completed balloon.

High quality balloon has a long shelf life, so that it will not be direct sunlight, avoid extreme temperature.

photobank (12)

Inquiry