Making Machine For Surgical Medical Dipping Glove

Production line process of making machine for surgical medical dipping glove:Hand mould cleaning is standard pickling system,Coagulant smoothly covers the hand mold,Dry the coagulant and keep it sticky in Oven,Insulation and temperature control, full stirring to drive the whole liquid level in Dip tank,Nylon edge brush, while minimizing the force acting on the film.
Chat Now

Product Details

Main Features

1. Completely design automation according to the chemical performance of raw materials and the process requirements of glove forming, with compact equipment process and more reasonable mechanical structure;Stable, uniform thickness of coating, no droop, uniform temperature, high yield and smooth process.

2. The drying box adopts the tunnel drying method, the principle of hot air rising, and the recycling of hot air circulating stirring, so that the machine can get the best effect under the minimum power.

3. Use the principle of effective heating space hot air circulation to reduce cost;Multistage PID intelligent temperature control system, the temperature error is not more than + / - 5 ℃, heated evenly luster.

4. High output, unique design of live joint, simple operation of changing mould, and faster circulation;

5. Automatic vibrating dripping and homogenizing system make the finished gloves more neat and uniform in thickness and thickness.

6. Aiming at the fragile defects of ceramic mould during vibration, the conveying mechanism of this equipment adopts the special guidance track to run smoothly, reliably, non-crawling and non-blocking, meeting the stationarity requirements of the conveying device during operation.

7. Adopt the special high-temperature resistant chain and co-extrusion method to speed up production and increase output.

Technical parameters:

Model
Machine Size
(m)
Speed
(m/min)
Capacity
(pcs/hr)
Heat consumption (cal/hr)
Power
(kw/hr)
Mould
(pcs)
Chain
(m)
JB-SBA50*6
50*1.8*6.5*6 layers
8.3
5,000
450,000
32
3,000
300
JB-SBA60*6
60*1.8*6.5*6 layers
10
6,000
550,000
34
3,600
360
JB-SBA80*6
80*1.8*6.5*6 layers
13.3
8,000
750,000
45
4,800
480
JB-SBA100*6
100*1.8*6.5*6 layers
20
12,000
1,100,000
70
6,000
600
JB-SBA110*6
110*1.8*6.5*6 layers
21.6
13,000
1,200,000
75
6,600
660
JB-SBA60*8
60*1.8*13*8 layers
10
7,200
730,000
45
4,800
480
JB-SBA80*8
80*1.8*13*8 layers
16.7
10,000
1,100,000
65
6,400
640
JB-SBA100*8
100*1.8*13*8 layers
22
13,200
1,470,000
70
8,000
800
JB-SBA110*8
110*1.8*13.*8 layers
24
14,400
1,600,000
80
8,800
880
Making machine for surgical medical dipping glove
examinational glove dipping line
surgical glove machine
hospital surgical glove making machine

Production line process of making machine for surgical medical dipping glove:Hand mould cleaning is standard pickling system,Coagulant smoothly covers the hand mold,Dry the coagulant and keep it sticky in Oven,Insulation and temperature control, full stirring to drive the whole liquid level in Dip tank,Nylon edge brush, while minimizing the force acting on the film.After filtration, vacuum pumping and static setting, the mixture was sent into the dip tank of the production line by the pump. Under normal production conditions, the hand mould on the pipeline automatically enters the impregnation tank, and the hand mould adhered to the emulsion comes out of the dipping slot in turn, and keeps rotating in the process.

Inquiry