Latex Dipping Condom Making Equipment

Existing condoms are synthetic natural rubber, natural latex and waterborne polyurethane in the absence of additives after non-pollution synthesis and processing of condoms, the existence of thin products (0.02mm), products of good density and high barrier, does not contain water-soluble protein and nitrosamines.
Chat Now

Product Details

Existing condoms are synthetic natural rubber, natural latex and waterborne polyurethane in the absence of additives after non-pollution synthesis and processing of condoms, the existence of thin products (0.02mm), products of good density and high barrier, does not contain water-soluble protein and nitrosamines.

The utility model provides the following technical schemes:Condom production line, including frame, frame described are placed at the top of the track, and on one side of the rack installation has main control box, as described in the bottom of the orbit by rotating fittings fixed connection with mold, as described in the interior of the frame from left to right with pickling, cleaning mechanism and drying, glue tank, the drying mechanism, edge, the second drying, rinsing demoulding mechanism, sink and boxes, described in the pickling frame installed on both sides at the top of the mast, mast symmetrical distribution of two, and two mast is placed at the top of the pickling bath, described soak glue tank at the bottom of the installation of rubber support,Demoulding mechanism described in flushing runs on only one side of the middle groove, and the groove in the middle of the side to open have a collection trough, described in the collection tank is installed in one side of the motor, the other end by a shaft rotational connection with rotor cage, described tumble drying is set up on the wall in one side of the sponge layer, described by the sink first half inside a filter, and by the second half side of the sink control valve installed with mentioned boxes are installed on the inner wall of the photoelectric counter,The cleaning mechanism, the drying mechanism, the first drying mechanism, the flanging mechanism, the second drying mechanism, the washing and stripping mechanism, the photoelectric counter, the drainage control valve, the lifting frame and the motor are electrically connected with the main controller installed inside the main control box.

photobank (83)

The utility model adopts drawer-type filter net to collect and adsorb the used water through drawer-type filter net, so as to solve the problem that the collected water cannot be absorbed and filtered, so that the water can be directly discharged and cannot be recycled, leading to waste of water resources.

图片4

JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.

工厂外观

设备包装运输2

Model

JB-CD01

JB-CD02

Size(L*W*H)

35*1.6*1.9m

50*1.6*1.9m

Capacity

9000 pcs/hr

13000 pcs/hr

Moulds

1800 pcs

2600 pcs

Heat

350000Kcal/hr

420000Kcal/hr

Latex

140 ton/year

210 ton/year


Inquiry