Good Quality Latex Balloon Making Machine

Good Quality Latex Balloon Making Machine

Latex balloon production line is the raw material for processing, through the balloon mold, the way of full rubber, and then through the vulcanization drying treatment of the production process, on the production of latex balloon automation production line.Latex balloon production line according to different mold production of latex balloon size models are also different.
Chat Now

Product Details

Latex balloon production line is the raw material for processing, through the balloon mold, the way of full rubber, and then through the vulcanization drying treatment of the production process, on the production of latex balloon automation production line.Latex balloon production line according to different mold production of latex balloon size models are also different.

Production line equipment from the process is divided into ingredients, forming, testing three steps.The following is an example of a condom production line with high technical requirements to illustrate the process of the latex product production line.

Process flow:

1, ingredients,

Ingredients are based on the production of products to configure raw materials, this process belongs to the scope of product technology, product process engineer to raw material ratio, processing, storage, parking is responsible for.Specific to the latex balloon production ingredients, the product process engineer is also responsible for the raw materials of vulcanization, sand grinding, centrifugal, many times with the specific process of rubber.Of course, in the whole production line, the specific equipment of vulcanization, sand grinding, centrifugal, parked, and adding glue for many times is provided by the integrated party of production line equipment, and the time, strength and effect of each step of operation are determined by the process engineer.

2: forming

The forming process is the most important part for the production of latex balloons.The equipment of latex balloon production line is driven by chain, and the mould is installed on the chain in a reasonable way. Driven by the motor, the equipment moves forward orderly according to the pre-designed track. In the process of moving forward, one working procedure is completed until the corresponding products are produced.On the basis of summarizing the forming technology at home and abroad, the balloon production line equipment of jubao machinery adopts the method of three times dipping glue to ensure the quality of the product, so as to avoid the leakage of the product to the greatest extent.After the mold is soaked in the glue tank for the first time, it is dried in the oven. According to the process of the chain, the mold will go to the glue tank for the second time to soak the glue, and then dry it for the third time.The other process has two functions, 1) is the preparation of the rubber dip mold, 2) preparation and demoulding before demoulding.

气球线3

Product features:

1. The latex balloon production line is designed according to the chemical properties of raw materials and the requirements of balloon forming process. The process flow is compact and the structure is reasonable.

2. The drying box adopts tunnel drying method, hot air rising principle, recycling hot air circulation and stirring, so that the machine can get the best effect under the minimum power.

3. In the design process of the balloon production line, the effective heating space is greatly utilized. The hot air circulation principle and intelligent PID temperature control system are adopted.

4. High output, unique live joint design, easy to replace the mold, speed up the cycle;

5. The automatic vibrating glue dropping and glue levelling system make the finished balloon with good quality.

6. Adopt special high-temperature resistant chain and co-extrusion one-step method to accelerate the production speed and increase the output.

JUBAO is a professional design, manufacture all kinds of gloves equipment production enterprise, its excellent product quality and first-class service to win the customer high praise and recognition. Brings together various excellent equipment research and development personnel and chemical formula of talent, and with a number of well-known domestic and foreign manufacturers, companies, universities and research institutions established long-term strategic partnership, committed to the mechanical equipment frontier technology research and development of new products.

JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.




Inquiry