Full automatic rubber party balloon dipping making machine

The material of the balloon production equipment is latex. The machine soaked the clamps with the balloon grinding tool into the container with the latex and then put them into the oven for drying. After the specified temperature and time, the equipment was taken out of the oven and the completed balloon was removed from the mold.By sticking talcum powder on it, the whole process is completed.
Chat Now

Product Details

The material of the balloon production equipment is latex. The machine soaked the clamps with the balloon grinding tool into the container with the latex and then put them into the oven for drying. After the specified temperature and time, the equipment was taken out of the oven and the completed balloon was removed from the mold.By sticking talcum powder on it, the whole process is completed.

One, batching batching is to configure raw materials according to the product to be produced, this process belongs to the scope of product technology, product process engineer to raw material ratio, processing, storage, parking is responsible for.When it comes to the batching of balloon production, the product process engineer is also responsible for the vulcanization of raw materials, sand grinding, centrifugation and the specific process of adding glue for many times.Of course, in the whole production line, the specific equipment of vulcanization, sand grinding, centrifugation, storage and adding glue for many times is provided by the integrator of the production line, and the time, strength and effect of each step of operation are determined by the process engineer.Forming process is the most important part for the integrator.The production line of latex products is driven by a chain, and the mould is installed on the chain in a reasonable way. Driven by the motor, the production line moves forward in an orderly way according to the pre-designed track. In the process of moving forward, a series of working procedures are completed until the corresponding products are produced.On the basis of summarizing the forming technology at home and abroad, we adopt the method of three times dipping glue to ensure the quality of the products, so as to avoid the leakage of the products to the greatest extent.After the mold is soaked in the glue tank for the first time, it is dried in the oven. According to the process of the chain, the mold will go to the glue tank for the second time to soak the glue, and then dry it for the third time.The other process has two functions, 1) is the preparation of the rubber dip mold, 2) preparation and demoulding before demoulding.

气球线7

Function and character:

3. The machine makes great use of the effective heating space in the design process, adopts the hot air circulation principle and intelligent PID temperature control system, and the temperature control is accurate, enabling the machine to achieve the best energy saving effect and reduce the cost expenditure;

4. High output, unique design of live joint, simple operation of changing mould, and faster circulation;

5. The automatic vibrating droplet and homogenization system make the finished balloon better in quality.

photobank (78)

JUBAO is a professional design, manufacture all kinds of gloves equipment production enterprise, its excellent product quality and first-class service to win the customer high praise and recognition. Brings together various excellent equipment research and development personnel and chemical formula of talent, and with a number of well-known domestic and foreign manufacturers, companies, universities and research institutions established long-term strategic partnership, committed to the mechanical equipment frontier technology research and development of new products.

工厂外观

证书2

Model

JB-QQ45

JB-QQ60

JB-QQ80

JB-QQ100

Dimension(L*W*H*)

45*1.26*4.45m
45*1.70*4.45m  45*2.23*4.45m

60*1.26*4.45 m

60*1.70*4.45 m

60*2.23*4.45m

80*1.26*4.45m

80*1.70*4.45m

80*2.23*4.45m

100*1.26*4.45m

100*1.70*4.45m

100*2.23*4.45m

Layer

2

2

2

2

Color/time

4/6/8

4/6/8

4/6/8

4/6/8

Mold/row

16/24/32

16/24/32

16/24/32

16/24/32

Mold(pcs)

10912/16368/21824

14944/22416/29888

20272/30408/40544

25600/38400/51200

Capacity(pcs/hr)

10560/15840/21120

14400/21600/28800

19200/28800/38400

24000/36000/48000

Heat(Kcal/hr)

250000

400000

500000

625000

Power(kw/hr)

23kw

29kw

32kw

40kw

Weight(ton)

35

42

45

56

Heating Source

SteamThermos oilNatural GasElectricity Etc.

Voltage(V)

380/220V   50-60HZ


Inquiry