The material of the balloon production equipment is latex. Advertisement balloon dipping machine soaked the clamps with the balloon grinding tool into the container with the latex and then put them into the oven for drying. After the specified temperature and time, the equipment was taken out of the oven and the completed balloon was removed from the mold.
1. The equipment is designed according to the chemical performance of raw materials and the requirements of balloon forming process, with compact process and reasonable structure.
2. The drying box adopts the tunnel drying method, the principle of hot air rising, and the recycling of hot air circulating stirring, so that the machine can get the best effect under the minimum power.
3. The machine makes great use of the effective heating space in the design process, adopts the hot air circulation principle and intelligent PID temperature control system, and the temperature control is accurate, enabling the machine to achieve the best energy saving effect and reduce the cost expenditure;
4. High output, unique design of live joint, simple operation of changing mould, and faster circulation;
5. The automatic vibrating droplet and homogenization system make the finished balloon better in quality.
6. Adopt special high-temperature resistant chain and co-extrusion method to speed up production and increase output.
JUBAO is manufacturer to research and development,design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.
The material of the balloon production equipment is latex. Advertisement balloon dipping machine soaked the clamps with the balloon grinding tool into the container with the latex and then put them into the oven for drying. After the specified temperature and time, the equipment was taken out of the oven and the completed balloon was removed from the mold.The whole plant process and supporting equipment of the balloon production line: 1. Cutting rubber: Latex is cut from the tree to keep fresh. Second, pre-vulcanization: Latex balloon is vulcanized before production, and the preserved latex is extracted into the former vulcanization station, and the ingredients are vulcanized to add color. Third, stereotyped vulcanization: the pre-vulcanized ingredients are delivered to the balloon production line, production line: mold cleaning, dipping coagulant, dipping, crimping, drying, demoulding. Heating system: There are three ways to give the production line heating: natural gas, steam, heat transfer oil, hot air stove (customized according to the actual situation of the customer). Fourth, post-vulcanization: the surface treatment of the formed balloon is divided into three parts: 1. boiled and vulcanized, 2. surface treatment, 3, water washing. 5. Dryer: The post-vulcanized balloon can be packaged and sold by drying it in the dryer.
45*1.26*4.45m 45*1.70*4.45m 45*2.23*4.45m
60*1.26*4.45m 60*1.70*4.45m 60*2.23*4.45m
80*1.26*4.45m 80*1.70*4.45m 80*2.23*4.45m
100*1.26*4.45m 100*1.70*4.45m 100*2.23*4.45m
Steam,Thermos oil,Natural Gas,Electricity Etc.
Hot Tags: advertisement balloon dipping machine, China, manufacturers, suppliers, Turnkey factory, cheap, customized, quotation, price list